Nexans RV-K 2X2.5 mm² GL3500

Descripción

Descripción

Estándares

  • Internacional
    IEC 60502; IEEE 383

Nexans RV-K

BAJA TENSION: 0.6/1 kV

El cable Nexans RV-K es un cable mono/multi conductor flexible, de clase 5, con buena estanqueidad (AD7), para el transporte y distribución de energía eléctrica en instalaciones fijas, conexiones industriales de baja tensión, redes urbanas, instalaciones en edificios, redes subterráneas de alumbrado exterior, etc.

 

El cable se instala al aire libre, enterrado, entubado y tiene muy buena estanqueidad (AD7). Puede ser instalado sobre bandejas, canalizaciones, en ductos o fijado en fachadas, sin embargo, Los cables RV-K no están permitidos en servicios provisionales en general (obras, ferias, stands... ITC-BT 33, 34 ...) ni para servicios móviles, ni prolongados, ni para servicios sumergidos.

 

En montaje enterrados, prever una protección mecánica adicional.

 

Debido a su Flexibilidad y fácil pelado, es muy adecuado para instalaciones interiores y exteriores de trazado complejo donde no se requiera normativa AS (Si lo requiere, recomendamos ver el RZ1-K) .

 

Gama compatible con MOBIWAY

Características

Características

Características de construcción

Características de construcción

Aislamiento
Polietileno reticulado
Color de cubierta
Negro
Con conductor amarillo/verde
No
Cubierta exterior
PVC
Flexibilidad del conductor
Flexible, Clase 5
Material del conductor
Cobre desnudo
Libre de plomo
Con neutro de sección reducida
No
Forma del conductor
Circular

Características dimensionales

Características dimensionales

Espesor medio del aislamiento
- mm
Número de conductores
2
Sección del conductor
2,5 mm²
Peso aproximado
180 kg/km
Diámetro exterior máximo
11,2 mm
Neutral conductor section (when smaller)
- mm²

Características eléctricas

Características eléctricas

Resistencia máxima del conductor en CC a 20º C
- Ohm/km
Tensión nominal de servicio Uo/U
0,6/1 KV
Intensidad admisible bajo tubo
52 A
Intensidad admisible al aire libre
33 A

Características mecánicas

Características mecánicas

Flexibilidad del cable
Flexible
Resistencia mecánica a impactos
Buena

Características de uso

Características de uso

Longitud
- m
Resistencia a la intemperie
Muy buena
Resistencia química
Accidental
Temperatura ambiente de utilización (rango)
-10 ... 60 °C
Temperatura máxima del conductor
90 °C
Temperatura máxima del conductor en corto-circuito
250 °C
No propagación de la llama
UNE-EN 50265-2-1
Embalaje
Bobina
Estanqueidad
AD6

Recursos

Recursos

Documentación

Current capacity table XLPE insulation single core three phase

Sección del conductor A1 - Insulated conductors in conduit in a thermally insulated wall B1 - Insulated conductors in conduit on a wooden wall C - Single-core or multi-core cable on a wooden wall D1 - Single-core or Multi-core cable in ducts in the ground D2 - Single-core or Multi-core cables designed to be buried directly in the ground F - Single-core flat cables, touching in free air Ft - Single-core trefoil cables, touching in free air G - Single-core horizontal spaced Gv - Single-core flat vertical spaced
mm² Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al
2.5 23.0 19.0 28.0 22.0 30.0 24.0 28.0 22.0 30.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

Current capacity table XLPE insulation single core single phase

Sección del conductor A1 - Insulated conductors in conduit in a thermally insulated wall B1 - Insulated conductors in conduit on a wooden wall C - Single-core or multi-core cable on a wooden wall D1 - Single-core or Multi-core cable in ducts in the ground D2 - Single-core or Multi-core cables designed to be buried directly in the ground F - Single-core flat cables, touching in free air
mm² Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al
2.5 26.0 20.0 31.0 25.0 33.0 26.0 33.0 26.0 35.0 0.0 0.0 0.0

Current capacity table XLPE insulation multicore single phase

Sección del conductor A2 - Multi-core cable in conduit in a thermally insulated wall B2 - Multi-core cable in conduit on a wooden wall C - Single-core or multi-core cable on a wooden wall D1 - Single-core or Multi-core cable in ducts in the ground D2 - Single-core or Multi-core cables designed to be buried directly in the ground E - Multi-core cable in free air
mm² Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al
2.5 25.0 19.5 30.0 23.0 33.0 26.0 33.0 26.0 35.0 0.0 36.0 28.0

Current capacity table XLPE insulation multicore three phase

Sección del conductor A2 - Multi-core cable in conduit in a thermally insulated wall B2 - Multi-core cable in conduit on a wooden wall C - Single-core or multi-core cable on a wooden wall D1 - Single-core or Multi-core cable in ducts in the ground D2 - Single-core or Multi-core cables designed to be buried directly in the ground E - Multi-core cable in free air
mm² Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al
2.5 22.0 19.5 26.0 23.0 30.0 26.0 33.0 26.0 30.0 0.0 36.0 28.0

Declaración de desempeño

  • Declaration of Performance n� : 1000232-ESPO
  • Certification Date : 15/9/21
  • AVCP (Assessment and Verification of Constancy of Performance) : System 3
  • Notified body : NB 1722
  • Declared performance : Eca

Contáctanos

Temas sobre los que desea recibir mayor información

Campos requeridos

Por favor revise la data ingresada e intente nuevamente

El correo debe contener este símbolo @

Protección de data personal

Tiene el derecho de rechazar el procesamiento de sus datos personales y/o su uso para propósitos comerciales

¡Gracias!

Gracias por contactarse con nosotros. Nos pondremos en contacto pronto.

Error

Ocurrió un error. Por favor intentar nuevamente

Cerrar